DS1085LZ-25B2+ Encyclopedia Entry

Product Overview

Category

DS1085LZ-25B2+ belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for clock generation and timing applications.

Characteristics

• High precision and stability
• Low power consumption
• Wide operating temperature range
• Compact package size

Package

DS1085LZ-25B2+ is available in a small form factor package, typically a 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of DS1085LZ-25B2+ lies in its ability to provide accurate clock signals for various electronic systems.

Packaging/Quantity

This product is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.

Specifications and Parameters

• Operating voltage: 2.7V to 5.5V
• Output frequency range: 1Hz to 100MHz
• Temperature range: -40°C to +85°C
• Output type: CMOS/TTL compatible

Pin Configuration

The pin configuration of DS1085LZ-25B2+ is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | OUT | Clock output | | 4 | NC | No connection | | 5 | NC | No connection | | 6 | NC | No connection | | 7 | NC | No connection | | 8 | NC | No connection | | 9 | NC | No connection | | 10 | NC | No connection | | 11 | NC | No connection | | 12 | NC | No connection | | 13 | NC | No connection | | 14 | NC | No connection | | 15 | NC | No connection | | 16 | NC | No connection |

Functional Characteristics

• Frequency accuracy: ±10ppm
• Start-up time: <1ms
• Output enable/disable control
• Power-down mode for low power consumption

Advantages and Disadvantages

Advantages

• High precision and stability
• Wide operating temperature range
• Low power consumption

Disadvantages

• Limited output frequency range
• No built-in frequency divider

Applicable Range of Products

DS1085LZ-25B2+ is suitable for a wide range of electronic devices that require accurate clock signals, such as microcontrollers, data communication systems, and consumer electronics.

Working Principles

DS1085LZ-25B2+ utilizes an internal crystal oscillator to generate precise clock signals. The output frequency can be adjusted through external components.

Detailed Application Field Plans

DS1085LZ-25B2+ can be used in various applications, including: 1. Microcontroller-based systems requiring accurate timing. 2. Data communication systems for synchronization purposes. 3. Consumer electronics devices with clock-dependent functions.

Detailed Alternative Models

Some alternative models to DS1085LZ-25B2+ are: - DS1086LZ-25B2+ - DS1087LZ-25B2+ - DS1088LZ-25B2+

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of DS1085LZ-25B2+? A: The maximum output frequency is 100MHz.

2. Q: Can DS1085LZ-25B2+ operate at voltages below 2.7V? A: No, the minimum operating voltage is 2.7V.

3. Q: Does DS1085LZ-25B2+ support frequency modulation? A: No, it does not support frequency modulation.

4. Q: Is DS1085LZ-25B2+ RoHS compliant? A: Yes, it is RoHS compliant.

5. Q: Can DS1085LZ-25B2+ be used in automotive applications? A: Yes, it can be used in automotive applications within the specified temperature range.

This concludes the encyclopedia entry for DS1085LZ-25B2+.