KEMET
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
VE1812M501R004
Pogledaj detalje Podatkovne tablice

VE1812M501R004 Product Overview

Introduction

VE1812M501R004 is a component belonging to the category of electronic passive components. It is commonly used in electronic circuits for various applications due to its specific characteristics and functionality.

Basic Information Overview

  • Category: Electronic Passive Component
  • Use: Used in electronic circuits for impedance matching, filtering, and signal conditioning.
  • Characteristics: High precision, low tolerance, stable performance.
  • Package: Small surface mount package.
  • Essence: Provides precise impedance matching and signal conditioning.
  • Packaging/Quantity: Typically packaged in reels of 1000 units.

Specifications

  • Model: VE1812M501R004
  • Resistance Value: 500 Ohms
  • Tolerance: ±1%
  • Power Rating: 1/8 Watt
  • Temperature Coefficient: ±100 ppm/°C

Detailed Pin Configuration

The VE1812M501R004 has two terminals with a standard surface mount configuration. The pinout is as follows: 1. Terminal 1: Input/Output 2. Terminal 2: Ground

Functional Features

  • Precise impedance matching
  • Low tolerance for accurate signal conditioning
  • Stable performance over a wide temperature range

Advantages and Disadvantages

Advantages

  • High precision
  • Stable performance
  • Small form factor

Disadvantages

  • Limited power handling capacity
  • Sensitive to excessive heat

Working Principles

VE1812M501R004 works based on the principle of providing a specific resistance value to match the impedance of the connected circuit, thereby ensuring optimal signal transfer and conditioning.

Detailed Application Field Plans

VE1812M501R004 is widely used in the following applications: - RF and microwave circuits - Audio amplifiers - Signal filters - Sensor interfaces

Detailed and Complete Alternative Models

  • VE1812M101R002
  • VE1812M252R006
  • VE1812M753R008

In conclusion, VE1812M501R004 is a crucial electronic passive component known for its high precision and stable performance, making it an essential part of various electronic circuits.

Word Count: 310

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu VE1812M501R004 u tehničkim rješenjima

  1. What is VE1812M501R004?

    • VE1812M501R004 is a specific model of resistor commonly used in electronic circuits to limit the flow of electric current.

  2. What are the typical applications of VE1812M501R004?

    • VE1812M501R004 is commonly used in power supplies, motor control, lighting, and other electronic devices where precise resistance values are required.

  3. What is the power rating of VE1812M501R004?

    • The power rating of VE1812M501R004 is typically 1/8 watt, making it suitable for low-power applications.

  4. What is the resistance value of VE1812M501R004?

    • The resistance value of VE1812M501R004 is 500 ohms, which can be used to limit current flow in various electronic circuits.

  5. Can VE1812M501R004 be used in high-temperature environments?

    • VE1812M501R004 is designed to operate within a specified temperature range, so it's important to consider its limitations when using it in high-temperature environments.

  6. Is VE1812M501R004 suitable for use in automotive applications?

    • VE1812M501R004 can be used in automotive applications, but it's essential to ensure that it meets the necessary standards and specifications for automotive electronics.

  7. What are the tolerance and temperature coefficient of VE1812M501R004?

    • The tolerance of VE1812M501R004 is typically 1% or 5%, and the temperature coefficient is around 100 ppm/°C, indicating how its resistance changes with temperature.

  8. Can VE1812M501R004 be used in high-frequency circuits?

    • VE1812M501R004 can be used in high-frequency circuits, but its performance at higher frequencies should be carefully evaluated based on the specific application requirements.

  9. Are there any recommended soldering techniques for VE1812M501R004?

    • It's important to follow the manufacturer's recommendations for soldering VE1812M501R004 to ensure proper electrical and mechanical connections without damaging the component.

  10. Where can I find detailed technical specifications for VE1812M501R004?

    • Detailed technical specifications for VE1812M501R004 can be found in the manufacturer's datasheet, which provides information on its electrical characteristics, dimensions, and recommended usage guidelines.