ISSI, Integrated Silicon Solution Inc
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
IS31FL3196-QFLS2-TR
Pogledaj detalje Podatkovne tablice

IS31FL3196-QFLS2-TR

Product Overview

Category

IS31FL3196-QFLS2-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for driving LEDs in various applications.

Characteristics

  • Integrated circuit designed for LED driving
  • High efficiency and low power consumption
  • Compact package size
  • Wide operating voltage range
  • Multiple control interfaces available

Package

IS31FL3196-QFLS2-TR is available in a small form factor QFN package.

Essence

The essence of this product lies in its ability to efficiently drive LEDs, enabling illumination in a wide range of electronic devices.

Packaging/Quantity

IS31FL3196-QFLS2-TR is typically packaged in reels and is available in large quantities for mass production purposes.

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Number of Channels: 96
  • Maximum Output Current per Channel: 25mA
  • Control Interface: I2C, SPI, or GPIO
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of IS31FL3196-QFLS2-TR is as follows:

  1. VDD - Power supply voltage
  2. SDA - I2C data input/output
  3. SCL - I2C clock input
  4. CS - Chip select input (SPI mode)
  5. SDI - Serial data input (SPI mode)
  6. SDO - Serial data output (SPI mode)
  7. GND - Ground
  8. RST - Reset input
  9. INT - Interrupt output
  10. OUT1 to OUT96 - LED output pins

Functional Features

  • Individual control of each LED channel
  • Programmable current control for precise brightness adjustment
  • Built-in PWM control for smooth dimming
  • Support for various LED display patterns and animations
  • Flexible control interfaces for easy integration into different systems

Advantages and Disadvantages

Advantages

  • High efficiency and low power consumption
  • Compact package size allows for space-saving designs
  • Wide operating voltage range enables compatibility with different power sources
  • Versatile control interfaces provide flexibility in system integration

Disadvantages

  • Limited number of channels (96) may not be sufficient for certain applications requiring a higher number of LEDs
  • Requires external components for proper operation, increasing overall system complexity

Working Principles

IS31FL3196-QFLS2-TR operates by receiving control signals from the microcontroller through the selected interface (I2C, SPI, or GPIO). These control signals determine the desired LED output pattern and brightness level. The integrated circuit then drives the connected LEDs accordingly, utilizing programmable current control and PWM techniques to achieve the desired illumination.

Detailed Application Field Plans

IS31FL3196-QFLS2-TR finds application in various fields, including but not limited to: - Consumer electronics: LED displays in smartphones, tablets, and wearable devices - Automotive: Interior and exterior lighting systems - Industrial: Control panels, instrumentation, and signage - Gaming: Backlighting and visual effects in gaming peripherals - Home automation: Smart lighting solutions

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to IS31FL3196-QFLS2-TR include: - TLC5940-Q1: 16-channel LED driver with integrated grayscale control - MAX7219: LED display driver with serial interface - APA102: Addressable RGB LED driver with high refresh rate

These alternative models can be considered based on specific project requirements and design constraints.

Word count: 533 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu IS31FL3196-QFLS2-TR u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of IS31FL3196-QFLS2-TR in technical solutions:

  1. Q: What is IS31FL3196-QFLS2-TR? A: IS31FL3196-QFLS2-TR is a LED driver IC (Integrated Circuit) designed for driving LEDs in various applications.

  2. Q: What is the maximum number of LEDs that can be controlled by IS31FL3196-QFLS2-TR? A: IS31FL3196-QFLS2-TR can control up to 96 individual LEDs.

  3. Q: What is the input voltage range supported by IS31FL3196-QFLS2-TR? A: The input voltage range supported by IS31FL3196-QFLS2-TR is typically between 2.7V and 5.5V.

  4. Q: Can IS31FL3196-QFLS2-TR support dimming or brightness control of LEDs? A: Yes, IS31FL3196-QFLS2-TR supports individual PWM (Pulse Width Modulation) control for each LED, allowing for dimming or brightness control.

  5. Q: Is IS31FL3196-QFLS2-TR compatible with I2C communication protocol? A: Yes, IS31FL3196-QFLS2-TR has an I2C interface, making it compatible with I2C communication protocol.

  6. Q: What is the maximum current per LED that IS31FL3196-QFLS2-TR can handle? A: IS31FL3196-QFLS2-TR can handle a maximum current of 20mA per LED.

  7. Q: Can IS31FL3196-QFLS2-TR be used in automotive applications? A: Yes, IS31FL3196-QFLS2-TR is designed to meet the requirements of automotive applications and can be used in such scenarios.

  8. Q: Does IS31FL3196-QFLS2-TR have built-in thermal protection? A: Yes, IS31FL3196-QFLS2-TR has built-in thermal protection to prevent overheating and ensure safe operation.

  9. Q: Can IS31FL3196-QFLS2-TR support cascading multiple LED driver ICs? A: Yes, IS31FL3196-QFLS2-TR supports cascading, allowing multiple ICs to be connected together for controlling a larger number of LEDs.

  10. Q: What are some typical applications of IS31FL3196-QFLS2-TR? A: Some typical applications of IS31FL3196-QFLS2-TR include LED matrix displays, LED backlighting, LED indicators, and LED signage.

Please note that these answers are general and may vary depending on the specific implementation and datasheet of IS31FL3196-QFLS2-TR.