5P49V5925B001NLGI8

Overview

Category: Electronic Component
Use: Clock Generator
Characteristics: High precision, low jitter
Package: QFN-32
Essence: Programmable clock generator
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Frequency Range: 1 MHz to 200 MHz
• Output Format: LVCMOS, LVDS, HCSL
• Supply Voltage: 2.5 V to 3.3 V
• Operating Temperature Range: -40°C to +85°C
• Phase Jitter: < 1 ps RMS (typical)

Detailed Pin Configuration

The 5P49V5925B001NLGI8 clock generator has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | XIN | Crystal oscillator input | | 4 | XOUT | Crystal oscillator output | | 5 | CLKOUT0 | Output clock 0 | | 6 | CLKOUT1 | Output clock 1 | | ... | ... | ... | | 32 | CLK_OUT7 | Output clock 7 |

Functional Features

• Programmable frequency synthesis
• Spread spectrum modulation support
• Integrated crystal oscillator interface
• Low power consumption
• Flexible output format selection

Advantages and Disadvantages

Advantages: - High precision and low jitter output - Wide frequency range - Multiple output formats supported - Easy integration with existing systems - Low power consumption

Disadvantages: - Limited number of output clocks (up to 7)

Working Principles

The 5P49V5925B001NLGI8 is a programmable clock generator that uses an integrated crystal oscillator or external clock source to generate multiple output clocks with high precision and low jitter. It utilizes frequency synthesis techniques to generate the desired frequencies and supports spread spectrum modulation for reducing electromagnetic interference.

The device can be programmed through its serial interface, allowing users to configure the output frequencies, formats, and other parameters according to their specific requirements. The integrated crystal oscillator interface simplifies the design process by eliminating the need for an external oscillator circuit.

Detailed Application Field Plans

The 5P49V5925B001NLGI8 clock generator finds applications in various electronic systems where precise clock signals are required. Some potential application fields include:

1. Communication Systems: Used in network switches, routers, and wireless communication devices to synchronize data transmission and reception.
2. Industrial Automation: Integrated into programmable logic controllers (PLCs) and industrial control systems to ensure accurate timing for process control and synchronization.
3. Test and Measurement Equipment: Employed in oscilloscopes, signal generators, and data acquisition systems to provide stable and synchronized clock signals for accurate measurements.
4. Consumer Electronics: Used in digital TVs, set-top boxes, and audio/video equipment to synchronize audio and video processing.
5. Automotive Electronics: Integrated into automotive infotainment systems, advanced driver-assistance systems (ADAS), and engine control units (ECUs) to ensure precise timing for various functions.

Detailed and Complete Alternative Models

1. 5P49V5925B002NLGI8: Similar to 5P49V5925B001NLGI8, but with extended temperature range (-40°C to +105°C).
2. 5P49V5925B003NLGI8: Similar to 5P49V5925B001NLGI8, but with additional output clocks (up to 14).
3. 5P49V5925B004NLGI8: Similar to 5P49V5925B001NLGI8, but with integrated voltage-controlled crystal oscillator (VCXO) for frequency modulation.

These alternative models provide similar functionality and can be considered as alternatives based on specific requirements and operating conditions.

---

Note: The content provided above is a sample entry and may not reflect the actual specifications or details of the mentioned product.