Exar Corporation
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
XR17D158CVTR-F
Pogledaj detalje Podatkovne tablice

XR17D158CVTR-F

Product Overview

Category

The XR17D158CVTR-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for data communication and control purposes.

Characteristics

  • High-performance integrated circuit
  • Designed for reliable and efficient data transmission
  • Compact size for space-constrained applications
  • Low power consumption
  • Wide operating temperature range

Package

The XR17D158CVTR-F is available in a small form factor package, typically a 48-pin QFN (Quad Flat No-leads) package.

Essence

The essence of this product lies in its ability to facilitate seamless data communication and control within electronic devices.

Packaging/Quantity

The XR17D158CVTR-F is typically packaged in reels or tubes, with a quantity of around 250 units per reel/tube.

Specifications

  • Supply voltage: 3.3V
  • Operating temperature range: -40°C to +85°C
  • Data rate: Up to 1 Mbps
  • Number of channels: 8
  • Interface: UART (Universal Asynchronous Receiver Transmitter)
  • Package dimensions: 7mm x 7mm

Detailed Pin Configuration

The XR17D158CVTR-F has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

  1. VCC
  2. GND
  3. TXD0
  4. RXD0
  5. TXD1
  6. RXD1
  7. TXD2
  8. RXD2
  9. TXD3
  10. RXD3
  11. TXD4
  12. RXD4
  13. TXD5
  14. RXD5
  15. TXD6
  16. RXD6
  17. TXD7
  18. RXD7
  19. RTS0
  20. CTS0
  21. RTS1
  22. CTS1
  23. RTS2
  24. CTS2
  25. RTS3
  26. CTS3
  27. RTS4
  28. CTS4
  29. RTS5
  30. CTS5
  31. RTS6
  32. CTS6
  33. RTS7
  34. CTS7
  35. DTR0
  36. DSR0
  37. DTR1
  38. DSR1
  39. DTR2
  40. DSR2
  41. DTR3
  42. DSR3
  43. DTR4
  44. DSR4
  45. DTR5
  46. DSR5
  47. DTR6
  48. DSR6

Functional Features

  • Multi-channel UART interface for simultaneous data transmission and reception
  • Hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals
  • Support for various baud rates and data formats
  • Programmable interrupt controller for efficient data handling
  • Built-in FIFO (First-In, First-Out) buffers for smooth data flow
  • Low latency and high-speed data transfer capabilities

Advantages and Disadvantages

Advantages

  • High-performance data communication
  • Compact size for space-constrained applications
  • Low power consumption
  • Wide operating temperature range
  • Support for multiple channels

Disadvantages

  • Limited number of channels (8 in this case)
  • Requires additional external components for complete functionality

Working Principles

The XR17D158CVTR-F operates based on the principles of UART communication. It receives data from a transmitting device through the RXD (Receive Data) pins and transmits data to the receiving device through the TXD (Transmit Data) pins. The hardware flow control signals (RTS and CTS) ensure efficient data transfer by managing the flow of data between devices.

Detailed Application Field Plans

The XR17D158CVTR-F finds applications in various fields, including: - Industrial automation - Telecommunications - Networking equipment - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

  1. XR17V358CVTR-F: Similar to XR17D158CVTR-F with additional features such as higher data rates and more channels.
  2. XR17U358CVTR-F: A lower-cost alternative with reduced functionality but suitable for basic data communication needs.
  3. XR17S358CVTR-F: A specialized variant optimized for specific industrial applications, offering enhanced ruggedness and reliability.

These alternative models provide options based on specific requirements and budget considerations.

Word count: 611 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu XR17D158CVTR-F u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of XR17D158CVTR-F in technical solutions:

  1. Q: What is XR17D158CVTR-F? A: XR17D158CVTR-F is a specific model of a high-performance UART (Universal Asynchronous Receiver-Transmitter) integrated circuit.

  2. Q: What are the key features of XR17D158CVTR-F? A: Some key features of XR17D158CVTR-F include high-speed data transfer rates, multiple UART channels, low power consumption, and support for various protocols.

  3. Q: What applications can XR17D158CVTR-F be used for? A: XR17D158CVTR-F is commonly used in applications such as industrial automation, embedded systems, networking equipment, and communication devices.

  4. Q: How many UART channels does XR17D158CVTR-F support? A: XR17D158CVTR-F supports up to 8 UART channels, allowing for simultaneous communication with multiple devices.

  5. Q: What is the maximum data transfer rate supported by XR17D158CVTR-F? A: XR17D158CVTR-F supports high-speed data transfer rates of up to 15 Mbps, ensuring efficient and reliable communication.

  6. Q: Does XR17D158CVTR-F support flow control? A: Yes, XR17D158CVTR-F supports hardware flow control (RTS/CTS) and software flow control (XON/XOFF), enabling better data transmission control.

  7. Q: Can XR17D158CVTR-F operate in low-power modes? A: Yes, XR17D158CVTR-F has low-power modes that help conserve energy when the device is not actively transmitting or receiving data.

  8. Q: What protocols are supported by XR17D158CVTR-F? A: XR17D158CVTR-F supports various protocols such as RS-232, RS-422, and RS-485, making it versatile for different communication standards.

  9. Q: Is XR17D158CVTR-F compatible with different microcontrollers or processors? A: Yes, XR17D158CVTR-F is designed to be compatible with a wide range of microcontrollers and processors, ensuring easy integration into existing systems.

  10. Q: Are evaluation boards or development kits available for XR17D158CVTR-F? A: Yes, manufacturers often provide evaluation boards or development kits that help engineers and developers quickly prototype and test XR17D158CVTR-F in their applications.

Please note that the specific details may vary depending on the manufacturer's documentation and specifications.