EPCOS (TDK)
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
B59850T1120A62
Pogledaj detalje Podatkovne tablice

B59850T1120A62

Product Overview

  • Category: Passive Component
  • Use: Inductor
  • Characteristics: High inductance, low resistance, suitable for high-frequency applications
  • Package: Surface mount
  • Essence: Efficient energy storage and filtering
  • Packaging/Quantity: Reel packaging, quantity varies by manufacturer

Specifications

  • Inductance: 120µH
  • Current Rating: 1.5A
  • DC Resistance: 0.12Ω
  • Tolerance: ±20%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The B59850T1120A62 is a surface mount inductor with two terminals. The pin configuration is as follows: - Pin 1: Input terminal - Pin 2: Output terminal

Functional Features

  • Efficient energy storage and release
  • Low resistance for minimal power loss
  • Suitable for high-frequency applications
  • Compact size for space-constrained designs

Advantages and Disadvantages

Advantages

  • High inductance value
  • Low DC resistance
  • Wide operating temperature range
  • Compact and lightweight design

Disadvantages

  • Tolerance of ±20% may require tighter control in some applications
  • Limited current rating compared to larger inductors

Working Principles

The B59850T1120A62 operates based on the principles of electromagnetic induction. When a current flows through the inductor, a magnetic field is generated, storing energy. This stored energy can then be released when the current changes, making it useful for filtering and energy storage applications.

Detailed Application Field Plans

The B59850T1120A62 is commonly used in the following applications: - Switch-mode power supplies - DC-DC converters - Filtering circuits in communication equipment - Automotive electronics

Detailed and Complete Alternative Models

  • B59850C0120A070: Similar inductance and current rating, different package type
  • B59850T1150A062: Higher inductance and current rating, similar package type
  • B59850B0120A070: Lower inductance and current rating, similar package type

This completes the entry for B59850T1120A62, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word Count: 313

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu B59850T1120A62 u tehničkim rješenjima

  1. What is the B59850T1120A62 component used for in technical solutions?

    • The B59850T1120A62 is a common mode choke designed to suppress electromagnetic interference in electronic circuits.

  2. What are the key specifications of the B59850T1120A62?

    • The B59850T1120A62 typically has an inductance of 12µH, a rated current of 1.2A, and is designed for use in a wide temperature range.

  3. How is the B59850T1120A62 typically connected in a circuit?

    • The B59850T1120A62 is usually connected in series with the signal or power lines to filter out common mode noise.

  4. What are the typical applications of the B59850T1120A62 in technical solutions?

    • The B59850T1120A62 is commonly used in power supplies, communication equipment, and other electronic devices to reduce electromagnetic interference.

  5. What are the advantages of using the B59850T1120A62 in technical solutions?

    • The B59850T1120A62 helps improve the reliability and performance of electronic systems by reducing common mode noise and interference.

  6. Are there any limitations or considerations when using the B59850T1120A62?

    • It's important to consider the voltage and current ratings, as well as the physical size of the B59850T1120A62 to ensure proper integration into the circuit.

  7. Can the B59850T1120A62 be used in high-frequency applications?

    • Yes, the B59850T1120A62 is suitable for use in high-frequency applications due to its design and performance characteristics.

  8. What are the recommended soldering and mounting techniques for the B59850T1120A62?

    • Soldering should be done using appropriate temperature profiles, and the component should be mounted securely to minimize mechanical stress.

  9. Is the B59850T1120A62 RoHS compliant?

    • Yes, the B59850T1120A62 is typically RoHS compliant, but it's always best to check the specific datasheet for compliance details.

  10. Where can I find more detailed information about the B59850T1120A62 for my technical solution?

    • Detailed information, including datasheets and application notes, can be found on the manufacturer's website or through authorized distributors.