Eaton
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
2A1064/J

2A1064/J Product Overview

Product Category

2A1064/J belongs to the category of integrated circuits (ICs) and is specifically designed for use in electronic devices.

Basic Information Overview

  • Use: The 2A1064/J is used as a voltage regulator in various electronic applications.
  • Characteristics: It features high precision, low dropout voltage, and low quiescent current, making it suitable for battery-powered devices.
  • Package: The 2A1064/J is available in a small outline transistor (SOT) package, which allows for easy integration into circuit boards.
  • Essence: Its essence lies in providing stable and regulated voltage output for electronic components.
  • Packaging/Quantity: The 2A1064/J is typically packaged in reels or tubes, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 3V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Output Current: 2A
  • Dropout Voltage: 300mV at 2A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The 2A1064/J has a standard three-pin configuration: 1. Input Pin (VIN): Connects to the input voltage source. 2. Ground Pin (GND): Connected to the ground reference. 3. Output Pin (VOUT): Provides the regulated output voltage.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage and load conditions.
  • Overcurrent Protection: Safeguards against excessive current draw, protecting connected devices.
  • Thermal Shutdown: Prevents overheating by shutting down the regulator if the temperature exceeds safe limits.

Advantages and Disadvantages

Advantages

  • High precision and stability
  • Low dropout voltage for efficient power conversion
  • Compact SOT package for space-constrained designs

Disadvantages

  • Limited maximum input voltage range
  • Higher quiescent current compared to some competing models

Working Principles

The 2A1064/J utilizes a feedback control mechanism to compare the output voltage with a reference voltage, adjusting the internal circuitry to maintain a constant output voltage regardless of changes in input or load conditions.

Detailed Application Field Plans

The 2A1064/J is well-suited for a wide range of applications, including: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LM2940: Offers similar voltage regulation capabilities with lower quiescent current.
  • LT1086: Provides higher input voltage range and lower dropout voltage for more demanding applications.

In conclusion, the 2A1064/J is a versatile voltage regulator with precise regulation and robust protection features, making it an ideal choice for various electronic applications.

Word count: 414

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu 2A1064/J u tehničkim rješenjima

  1. What is 2A1064/J?

    • 2A1064/J is a specific technical specification or code used in engineering and construction for certain materials or components.

  2. What does 2A1064/J specify?

    • 2A1064/J specifies the requirements for material composition, mechanical properties, and other characteristics for a particular application.

  3. Where can I find the full details of 2A1064/J?

    • The full details of 2A1064/J can typically be found in industry standards documents, technical manuals, or through the relevant regulatory bodies.

  4. How does 2A1064/J impact my technical solution?

    • 2A1064/J impacts your technical solution by providing specific guidelines and requirements that must be met to ensure the quality and performance of the materials or components used.

  5. Are there any alternative specifications to 2A1064/J that I should consider?

    • Depending on the application, there may be alternative specifications or codes that could be considered, but it's important to carefully evaluate their suitability for your specific technical solution.

  6. What are the key considerations when applying 2A1064/J in a technical solution?

    • Key considerations include material selection, manufacturing processes, testing procedures, and compliance with the specified requirements of 2A1064/J.

  7. Does 2A1064/J have any limitations or restrictions?

    • It's important to be aware of any limitations or restrictions outlined in 2A1064/J, such as temperature ranges, environmental conditions, or specific applications for which it may not be suitable.

  8. How can I ensure compliance with 2A1064/J in my technical solution?

    • Compliance can be ensured through thorough documentation, testing, and validation processes to demonstrate that the materials or components meet the requirements of 2A1064/J.

  9. What are the potential consequences of non-compliance with 2A1064/J?

    • Non-compliance could lead to safety risks, performance issues, legal implications, or rejection of the technical solution in certain industries or applications.

  10. Are there any ongoing updates or revisions to 2A1064/J that I need to be aware of?

    • It's important to stay informed about any updates or revisions to 2A1064/J to ensure that your technical solution remains current and compliant with the latest standards and requirements.