Diodes Incorporated
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
DDTA144GE-7-F
Pogledaj detalje Podatkovne tablice

DDTA144GE-7-F

Product Overview

Category

The DDTA144GE-7-F belongs to the category of semiconductor devices.

Use

It is used as a general-purpose transistor for various electronic applications.

Characteristics

  • Small form factor
  • High gain
  • Low power consumption

Package

The DDTA144GE-7-F is typically available in a SOT-23 package.

Essence

This product is essential for amplifying and switching electronic signals in various circuits.

Packaging/Quantity

It is commonly packaged in reels containing a quantity of 3000 units.

Specifications

  • Maximum Collector-Base Voltage: 50V
  • Maximum Collector Current: 100mA
  • Power Dissipation: 225mW
  • Transition Frequency: 250MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The DDTA144GE-7-F has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High voltage gain
  • Low noise
  • Fast switching speed

Advantages

  • Compact size
  • Versatile application
  • Reliable performance

Disadvantages

  • Limited power handling capability
  • Sensitivity to temperature variations

Working Principles

The DDTA144GE-7-F operates based on the principles of bipolar junction transistors, utilizing the control of current flow for signal amplification and switching.

Detailed Application Field Plans

The DDTA144GE-7-F is widely used in: - Audio amplifiers - Signal processing circuits - Switching applications

Detailed and Complete Alternative Models

Some alternative models to the DDTA144GE-7-F include: - BC847B - 2N3904 - MMBT3904

In conclusion, the DDTA144GE-7-F is a versatile semiconductor device with high gain and low power consumption, making it suitable for a wide range of electronic applications.

[Word count: 271]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu DDTA144GE-7-F u tehničkim rješenjima

  1. What is DDTA144GE-7-F?

    • DDTA144GE-7-F is a high-performance, low-power consumption digital temperature sensor designed for various technical applications.

  2. What is the operating temperature range of DDTA144GE-7-F?

    • The operating temperature range of DDTA144GE-7-F is typically from -40°C to 125°C.

  3. How accurate is DDTA144GE-7-F in temperature measurements?

    • DDTA144GE-7-F has a high accuracy of ±0.5°C in the typical temperature range.

  4. Can DDTA144GE-7-F be used in battery-powered devices?

    • Yes, DDTA144GE-7-F is designed for low-power consumption and can be effectively used in battery-powered devices.

  5. What interface does DDTA144GE-7-F use for communication with microcontrollers?

    • DDTA144GE-7-F uses an I2C interface for communication with microcontrollers, making it easy to integrate into various technical solutions.

  6. Is DDTA144GE-7-F suitable for industrial applications?

    • Yes, DDTA144GE-7-F is suitable for industrial applications due to its robust design and reliable performance.

  7. Does DDTA144GE-7-F have built-in temperature compensation features?

    • Yes, DDTA144GE-7-F incorporates built-in temperature compensation to ensure accurate temperature measurements across varying environmental conditions.

  8. What is the power supply voltage range for DDTA144GE-7-F?

    • The power supply voltage range for DDTA144GE-7-F is typically from 2.7V to 5.5V, making it compatible with a wide range of systems.

  9. Can DDTA144GE-7-F be used in automotive applications?

    • Yes, DDTA144GE-7-F is suitable for automotive applications, offering reliable temperature sensing in automotive systems.

  10. Are there any special considerations for PCB layout when using DDTA144GE-7-F?

    • It is recommended to follow the manufacturer's guidelines for PCB layout to optimize the performance of DDTA144GE-7-F and minimize potential interference.