QD
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
OP467GP
Pogledaj detalje Podatkovne tablice

OP467GP

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High precision, low noise, wide bandwidth
  • Package: DIP (Dual Inline Package)
  • Essence: Analog signal processing
  • Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

  • Supply Voltage Range: ±5V to ±18V
  • Input Offset Voltage: 0.5mV (maximum)
  • Input Bias Current: 10nA (maximum)
  • Input Offset Current: 1nA (maximum)
  • Gain Bandwidth Product: 2MHz (typical)
  • Slew Rate: 0.6V/µs (typical)
  • Output Current: 20mA (typical)

Detailed Pin Configuration

The OP467GP has a standard 8-pin DIP package with the following pin configuration:

  1. Non-Inverting Input (+IN)
  2. Inverting Input (-IN)
  3. Negative Power Supply (-V)
  4. Positive Power Supply (+V)
  5. Output (OUT)
  6. Compensation (COMP)
  7. Null (NULL)
  8. Ground (GND)

Functional Features

  • High precision amplification of analog signals
  • Low noise operation for accurate signal processing
  • Wide bandwidth allows for efficient signal transmission
  • High output current capability for driving external loads
  • Compensation pin for stability optimization
  • Null pin for offset voltage adjustment

Advantages and Disadvantages

Advantages: - High precision amplification ensures accurate signal processing - Low noise operation enhances signal fidelity - Wide bandwidth enables efficient transmission of signals - High output current capability allows for driving external loads

Disadvantages: - Limited supply voltage range compared to some other models - Relatively low gain bandwidth product compared to higher-end amplifiers

Working Principles

The OP467GP is an operational amplifier that amplifies analog signals with high precision. It operates by taking the difference between the voltages at its non-inverting and inverting inputs, and amplifying this difference to produce an output voltage. The amplifier's gain, bandwidth, and other characteristics are determined by its internal circuitry.

Detailed Application Field Plans

The OP467GP is commonly used in various applications requiring accurate signal amplification and processing. Some of the typical application fields include:

  1. Precision instrumentation
  2. Data acquisition systems
  3. Medical equipment
  4. Audio amplification
  5. Sensor signal conditioning

Detailed and Complete Alternative Models

  • AD8675: Precision Operational Amplifier
  • LT1677: Low Noise, Rail-to-Rail Output Operational Amplifier
  • OPA211: High Precision, Low Noise Operational Amplifier
  • MCP6002: Low Power, Rail-to-Rail Input/Output Operational Amplifier
  • LM358: Dual Operational Amplifier

These alternative models offer similar functionality and can be considered as alternatives to the OP467GP based on specific requirements and design constraints.

Word count: 329 words

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu OP467GP u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of OP467GP in technical solutions:

  1. Q: What is OP467GP? A: OP467GP is a precision operational amplifier (op-amp) integrated circuit commonly used in various technical applications.

  2. Q: What is the voltage supply range for OP467GP? A: The voltage supply range for OP467GP is typically between ±4V and ±18V.

  3. Q: What is the input offset voltage of OP467GP? A: The input offset voltage of OP467GP is typically very low, around 50µV.

  4. Q: Can OP467GP operate in high-temperature environments? A: Yes, OP467GP is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  5. Q: What is the typical gain bandwidth product of OP467GP? A: The typical gain bandwidth product of OP467GP is around 10MHz.

  6. Q: Is OP467GP suitable for low-power applications? A: Yes, OP467GP has a low quiescent current consumption, making it suitable for low-power applications.

  7. Q: Can OP467GP be used in single-supply applications? A: Yes, OP467GP can be used in both single-supply and dual-supply applications.

  8. Q: What is the output voltage swing range of OP467GP? A: The output voltage swing range of OP467GP is typically within a few millivolts of the supply rails.

  9. Q: Does OP467GP have built-in protection features? A: Yes, OP467GP includes built-in protection against overvoltage and reverse polarity conditions.

  10. Q: What are some common applications of OP467GP? A: Some common applications of OP467GP include precision instrumentation, data acquisition systems, medical equipment, and audio amplifiers.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for OP467GP.