Ametherm
Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
SL22 2R510
Pogledaj detalje Podatkovne tablice

SL22 2R510 Product Overview

Introduction

SL22 2R510 is a component belonging to the category of resistors. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of SL22 2R510.

Basic Information Overview

  • Category: Resistor
  • Use: Used to limit or control the flow of electric current in a circuit
  • Characteristics: High precision, low temperature coefficient, high stability
  • Package: SMD (Surface Mount Device)
  • Essence: Precision resistor for electronic circuits
  • Packaging/Quantity: Typically packaged in reels of 1000 units

Specifications

  • Resistance Value: 2.51 ohms
  • Tolerance: ±0.05%
  • Power Rating: 0.25W
  • Temperature Coefficient: ±15ppm/°C
  • Operating Temperature Range: -55°C to +155°C

Detailed Pin Configuration

SL22 2R510 has two terminals for connection in a circuit. The pin configuration is as follows: 1. Terminal 1: Connects to one end of the resistor 2. Terminal 2: Connects to the other end of the resistor

Functional Features

  • High Precision: Provides accurate resistance value
  • Low Temperature Coefficient: Minimal change in resistance with temperature variations
  • High Stability: Maintains consistent performance over time

Advantages and Disadvantages

Advantages

  • Precise resistance value
  • Stable performance over a wide temperature range
  • Compact SMD package for space-saving designs

Disadvantages

  • Limited power handling capability compared to larger through-hole resistors
  • Sensitive to excessive heat due to small size

Working Principles

SL22 2R510 operates based on the principle of resisting the flow of electric current in a circuit. When connected, it limits the current according to its specified resistance value, allowing for precise control of electrical signals.

Detailed Application Field Plans

SL22 2R510 is commonly used in the following applications: - Precision analog circuits - Sensor signal conditioning - Audio amplifiers - Test and measurement equipment

Detailed and Complete Alternative Models

Some alternative models to SL22 2R510 include: - SL22 2R500: 2.5 ohm resistor with ±0.1% tolerance - SL22 2R520: 2.52 ohm resistor with ±0.02% tolerance - SL22 2R490: 2.49 ohm resistor with ±0.05% tolerance

In conclusion, SL22 2R510 is a precision resistor with high stability and accuracy, suitable for various electronic applications requiring precise current control and signal conditioning.

[Word count: 398]

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu SL22 2R510 u tehničkim rješenjima

Sure, here are 10 common questions and answers related to the application of SL22 2R510 in technical solutions:

  1. Question: What is SL22 2R510?
    Answer: SL22 2R510 is a type of resistor commonly used in electronic circuits to limit current flow.

  2. Question: What is the power rating of SL22 2R510?
    Answer: The power rating of SL22 2R510 is typically 2 watts.

  3. Question: What is the resistance value of SL22 2R510?
    Answer: The resistance value of SL22 2R510 is 2.51 ohms.

  4. Question: What are the typical applications of SL22 2R510?
    Answer: SL22 2R510 is commonly used in power supplies, LED drivers, and other electronic devices where current limiting is required.

  5. Question: Is SL22 2R510 suitable for high-frequency applications?
    Answer: Yes, SL22 2R510 is suitable for high-frequency applications due to its stable performance.

  6. Question: Can SL22 2R510 be used in automotive electronics?
    Answer: Yes, SL22 2R510 is suitable for use in automotive electronics due to its reliability and temperature stability.

  7. Question: What is the temperature coefficient of SL22 2R510?
    Answer: The temperature coefficient of SL22 2R510 is typically around 100 ppm/°C.

  8. Question: Is SL22 2R510 suitable for surface mount technology (SMT) applications?
    Answer: Yes, SL22 2R510 is designed for surface mount applications, making it suitable for SMT assembly processes.

  9. Question: Can SL22 2R510 withstand high temperatures?
    Answer: Yes, SL22 2R510 is designed to withstand high operating temperatures, making it suitable for demanding environments.

  10. Question: What are the key advantages of using SL22 2R510 in technical solutions?
    Answer: Some key advantages include its compact size, high power handling capability, and suitability for various electronic applications.

I hope these questions and answers provide the information you were looking for! If you have any more specific questions, feel free to ask.