S-80930CNPF-G80TFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80930CNPF-G80TFG is packaged in a small outline transistor (SOT) package with five pins. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The S-80930CNPF-G80TFG has the following pin configuration:
```
| | --|1 |-- VDD --|2 |-- GND --|3 |-- RESET --|4 |-- NC --|____|-- VOUT ```
The S-80930CNPF-G80TFG operates by comparing the input voltage with a reference voltage internally generated. When the input voltage falls below the detection threshold, the reset output is activated, providing a signal to reset the connected device. The open drain output allows for easy integration with various circuit configurations.
The S-80930CNPF-G80TFG finds applications in a wide range of electronic devices, including but not limited to: - Battery-powered devices - Microcontrollers - Power management systems - Consumer electronics - Industrial control systems
For those seeking alternative models with similar functionality, the following options are available: - S-80930CNY-B8T1G - S-80930CNNB-G8XT2G - S-80930CLMC-G7PT2G
These alternatives offer comparable voltage detection ranges, package types, and functional features.
In conclusion, the S-80930CNPF-G80TFG is a versatile integrated circuit used for voltage detection and reset functions. Its low power consumption, accurate voltage detection, and small package size make it suitable for various electronic devices. However, its limited pin configuration options and unsuitability for high voltage applications should be considered.
Sure! Here are 10 common questions and answers related to the application of S-80930CNPF-G80TFG in technical solutions:
Q: What is the operating voltage range of S-80930CNPF-G80TFG? A: The operating voltage range of S-80930CNPF-G80TFG is typically between 2.0V and 6.0V.
Q: What is the maximum output current of S-80930CNPF-G80TFG? A: The maximum output current of S-80930CNPF-G80TFG is 100mA.
Q: Can S-80930CNPF-G80TFG be used in battery-powered applications? A: Yes, S-80930CNPF-G80TFG can be used in battery-powered applications as it has a low quiescent current consumption.
Q: Does S-80930CNPF-G80TFG have built-in overcurrent protection? A: No, S-80930CNPF-G80TFG does not have built-in overcurrent protection. External protection circuitry may be required.
Q: What is the typical dropout voltage of S-80930CNPF-G80TFG? A: The typical dropout voltage of S-80930CNPF-G80TFG is 0.15V at 100mA load.
Q: Can S-80930CNPF-G80TFG operate in high-temperature environments? A: Yes, S-80930CNPF-G80TFG is designed to operate in a wide temperature range from -40°C to +125°C.
Q: Is S-80930CNPF-G80TFG suitable for automotive applications? A: Yes, S-80930CNPF-G80TFG is AEC-Q100 qualified and can be used in automotive applications.
Q: Does S-80930CNPF-G80TFG have a shutdown function? A: No, S-80930CNPF-G80TFG does not have a shutdown function. It operates continuously once powered.
Q: Can S-80930CNPF-G80TFG be used as a voltage regulator for microcontrollers? A: Yes, S-80930CNPF-G80TFG can be used as a voltage regulator for microcontrollers and other low-power ICs.
Q: What package does S-80930CNPF-G80TFG come in? A: S-80930CNPF-G80TFG is available in a compact SOT-23-5 package for easy integration into various applications.
Please note that the answers provided here are general and may vary depending on the specific application requirements.