Slika može predstavljati.
Pogledajte specifikacije za pojedinosti o proizvodu.
S-80914CNPF-G8JTFG

S-80914CNPF-G8JTFG

Product Overview

Category

S-80914CNPF-G8JTFG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.2V to 6.0V
  • Low supply current: 1.0μA (typ.)
  • High accuracy: ±1.0%
  • Built-in delay circuit
  • Small package size: SOT-23-5
  • RoHS compliant

Package and Quantity

The S-80914CNPF-G8JTFG is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.2V to 6.0V
  • Operating temperature range: -40°C to +85°C
  • Output type: N-channel open drain
  • Output voltage: VOUT = VDD - VDET
  • Detection voltage options: 1.2V, 1.3V, 1.5V, 1.8V, 2.0V, 2.3V, 2.5V, 2.7V, 3.0V, 3.1V, 3.3V, 3.5V, 4.0V, 4.3V, 4.5V, 4.6V, 5.0V, 5.5V, 6.0V

Detailed Pin Configuration

The S-80914CNPF-G8JTFG has the following pin configuration:

  1. GND (Ground)
  2. VDD (Supply Voltage)
  3. VOUT (Output Voltage)
  4. MR (Manual Reset)
  5. VDET (Voltage Detection)

Functional Features

  • Voltage detection: The S-80914CNPF-G8JTFG can accurately detect the input voltage within the specified range.
  • Reset function: When the detected voltage falls below the set threshold, the output pin (VOUT) is pulled low, indicating a reset condition.
  • Manual reset: The MR pin allows for manual resetting of the device, overriding the voltage detection.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range allows for versatile applications.
  • Low supply current minimizes power consumption.
  • High accuracy ensures reliable voltage detection.
  • Small package size enables space-saving designs.
  • RoHS compliance promotes environmental friendliness.

Disadvantages

  • Limited number of available detection voltage options.
  • Lack of built-in hysteresis circuit may lead to potential noise-related issues.

Working Principles

The S-80914CNPF-G8JTFG operates by comparing the input voltage (VDET) with the internally set detection voltage. When the input voltage drops below the detection voltage, the output pin (VOUT) is pulled low, triggering a reset condition. The device continuously monitors the voltage and maintains the reset state until the voltage rises above the detection threshold.

Detailed Application Field Plans

The S-80914CNPF-G8JTFG finds application in various electronic devices where voltage detection and reset functions are required. Some specific application fields include:

  1. Microcontrollers: Ensuring proper initialization and safe operation by monitoring the supply voltage.
  2. Battery-powered devices: Preventing damage due to undervoltage conditions and optimizing battery life.
  3. Power management systems: Enabling efficient power control and protection mechanisms.
  4. Industrial automation: Providing reliable reset functionality for critical control systems.
  5. Consumer electronics: Enhancing system stability and preventing data loss during power fluctuations.

Detailed and Complete Alternative Models

  1. S-80914CNPF-G8JTTFG: Similar to S-80914CNPF-G8JTFG, but with an extended operating temperature range of -40°C to +105°C.
  2. S-80914ANPF-G8JTFG: A variant with a different package (SOT-89-5) for applications requiring higher power dissipation.
  3. S-80914BNPF-G8JTFG: Another alternative with a lower detection voltage range (0.9V to 4.6V) for specific low-voltage applications.

(Note: This is not an exhaustive list; please refer to the manufacturer's datasheet for a complete list of alternative models.)

In conclusion, the S-80914CNPF-G8JTFG is a versatile integrated circuit used for voltage detection and reset functions in various electronic devices. Its wide voltage detection range, low supply current, and small package size make it suitable for diverse applications. However, limited detection voltage options and the absence of a built

Navedite 10 uobičajenih pitanja i odgovora vezanih uz primjenu S-80914CNPF-G8JTFG u tehničkim rješenjima

Sure! Here are 10 common questions and answers related to the application of S-80914CNPF-G8JTFG in technical solutions:

  1. Q: What is the S-80914CNPF-G8JTFG? A: The S-80914CNPF-G8JTFG is a specific model of voltage detector IC (integrated circuit) manufactured by a particular company.

  2. Q: What is the purpose of the S-80914CNPF-G8JTFG? A: The S-80914CNPF-G8JTFG is designed to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: How does the S-80914CNPF-G8JTFG work? A: The S-80914CNPF-G8JTFG operates by comparing the input voltage with a reference voltage, triggering an output signal when the voltage crosses a predetermined threshold.

  4. Q: What is the voltage range supported by the S-80914CNPF-G8JTFG? A: The S-80914CNPF-G8JTFG typically supports a voltage range of X volts to Y volts (specify the actual range based on the datasheet).

  5. Q: Can the S-80914CNPF-G8JTFG be used in both AC and DC circuits? A: No, the S-80914CNPF-G8JTFG is specifically designed for use in DC circuits only.

  6. Q: What is the output format of the S-80914CNPF-G8JTFG? A: The S-80914CNPF-G8JTFG provides a digital output signal, usually in the form of an open-drain or push-pull output.

  7. Q: Is the S-80914CNPF-G8JTFG suitable for automotive applications? A: Yes, the S-80914CNPF-G8JTFG is often used in automotive systems due to its reliability and ability to withstand harsh environments.

  8. Q: Can the S-80914CNPF-G8JTFG be used as an overvoltage protector? A: Yes, the S-80914CNPF-G8JTFG can be configured to trigger an alarm or shutdown signal when the input voltage exceeds a certain threshold, acting as an overvoltage protector.

  9. Q: What are the typical applications of the S-80914CNPF-G8JTFG? A: The S-80914CNPF-G8JTFG is commonly used in power supply monitoring, battery management systems, electronic equipment protection, and various other voltage detection applications.

  10. Q: Where can I find more information about the S-80914CNPF-G8JTFG? A: You can refer to the datasheet provided by the manufacturer or visit their official website for detailed specifications, application notes, and technical support regarding the S-80914CNPF-G8JTFG.